Glass Railing System
Straight Panels
- PRE-ASSEMBLED panels are ordered and manufactured to CUSTOM lengths.
- Maximum span of 6'-0" (1829mm) centre to centre of posts for 27 PSF Wind Load (regular situations).
- Maximum span of 5'-6" (1676mm) centre to centre of posts for 30 PSF Wind Load.
- Maximum span of 5'-0" (1524mm) centre to centre of posts for 33 PSF Wind Load.
- Maximum span of 4'-6" (1372mm) centre to centre of posts for 37 PSF Wind Load.
- Maximum span of 4'-0" (1219mm) centre to centre of posts for 41 PSF Wind Load.
- Comprising of two vertical flat bars 2-1/2 " (63.5mm) wide x 5/16" (8mm) thick at each end.
- One number 1" (25.4mm) O.D. x 0.059" (1.5mm) wall horizontal kick rail.
2-1/2" (63.5mm) O.D. x 0.059" (1.5mm) wall top rail.
- Top horizontal rail ends are tapped M8 (5/16") and mechanically fastened to vertical flat bars with M8 (5/16") Cap Screws, while the bottom rail is fastened with Countersunk Allen Cap Screws.
- Each vertical flat bar is fitted with two complete glass bracket assemblies in other words four per panel.
- Each glass bracket assembly consists of a 2" (50mm) Diameter x 15/64" (6mm) thick countersunk fixing disc, one number M8 (5/16") securing fastener, two number 3/16" (5mm) Rubber gaskets and a 1/2" (12mm) long hosepipe to slide over the securing fastener to prevent the steel touching the glass.
Corner Panels
- Welded mitred joints.
- Overall size is standard 1'-0" x 1'-0" (304.8mm).
- Glass brackets can be removed easily, rotated and refitted 180 degrees. This could be necessary depending on whether you have an internal or external corner.
- Otherwise as above.
Stem & Base Plates
- One piece casting.
- Stem tapped twice horizontally for M12 (15/32") to receive M12 (15/32") Cap Screws.
- M12 (15/32") Cap Screws are supplied together with the stem.
- The base is holed twice to receive 3/8" (M10) Diameter Hilti Anchors or equivalent (See Engineers Specifications provided).
- Anchors are not supplied as adhesive shelf life could expire prior to installation.
End Posts - These are supplied loose and are required at all terminations in the railing (both ends)
Glass
- Minimum 0.472 (12mm) thick fully tempered/toughened with polished edges.
- CAD drawing indicating overall glass size including hole positions supplied on order.
- Glass not supplied due to high shipping costs, however, can be supplied if required.
Interlocking Connections - Two number 5/8" (16mm) Diameter x 55/64" (22mm) long interlocking connection pieces with four M8 (5/16") Cap Screws are supplied. These are packaged with the Stem and Base plate.
Grade of Stainless Steel - Available in Grade 304 for regular conditions and Grade 316 for aggressive conditions. Tubing, plate and castings are manufactured in accordance with the American Society For The Testing Of Metals (ASTM).
Finish - All stainless steel is brushed to a fine number 4 finish (approximately 240 Grit). Circular sections are circumferentially brushed and the balance of the components are longitudinally brushed.
Height - 42" (1067mm) Overall.
Fasteners - Shall be a minimum Grade A2-70, Fu= 101 ksi.
Loading - System meets or exceeds the requirements of the International Building Code 2006.
Comprehensive Specifications - See Engineers Specifications provided.
See Mounting Options »
 SEE STAINLESS STEEL RAILINGS PRODUCT BENEFITS
|
